Türkçe   İngilizce
Home
About
Products
News
Services
Certificates
Human Resources
Contact Us
 Quick Access
- Home Page
- About Us
Products
Thermal Insulation Motar
Plate Plaster Tool
Adhesive Mortar Plates
For Painted Buildings Adhesive Mortar Plates
Jamb Adhesive Mortar
Decorative Plaster Mortar Application
Adhesive Mortars
Joint Filler Materials
Water Isolation Mortars
Ground Application Mortars
Rough Construction Mortars
Primers
Repair And Plaster Mortars
Assistant Coating Products
- Services
- News
- Human Resources
- Contact
PRODUCTS
HomeProducts Thermal Insulation Motar « back
Plate Plaster Tool
1 / 5 Next
1 / 5 Next
 

APPLICATION
Used for coating polystyrene heat plates.

PROPERTIES
Applied on XPS and EPS. Provides smooth surface.

PREPARATION AND APPLICATION OF MORTAR
Amount of water (6-7 liters water/25 kg powder) is placed in a mixing bowl. Adding the powder material is mixed with a low-speed hand mixer.Rested for 5 minutes until homogeneous mortar is mixed. A layer of mortar(3mm) is applied with a steel trowel on the pre-glued plate. Placed to the plaster net (fibermesh) and embedded into the fresh mortar with the help of steel trowel. After the second layer of plaster steel (2mm), plaster is applied. It is recommended for finishing trowel. Sponges can cause distortion or surface dusting.

CONSUMPTION
5 - kg/m2 (mean)

TECHNICAL SPECIFICATIONS
Bonding Strength, N/mm2                                   > 0,2
Gloss                                                                Matt;G3
Dry Film Thickness, um                                       > 400, E5
Particle Size, um                                                <1500; S3
Water Vapor Transmission Rate, g (m2.day)         15
Water Transfer Speed, kg / (m2.hour 0, 5)            _ <0.1: W3
Covering cracks                                                  A0
Permeability of CO                                              C0
Resistance to Funga                                            K2

CERTIFICATE OF CONFORMITY
The above data have been obtained in laboratory. For more information, please consult our Technical Department. NANOKİM reserves the right to change the above information. NANOKİM is not responsible for any failure due to misapplication.

Other Products in This Group
   • Decorative Plaster Mortar Application  
   • Jamb Adhesive Mortar  
   • For Painted Buildings Adhesive Mortar Plates  
   • Adhesive Mortar Plates  
   • Plate Plaster Tool  
   
 
 
Address: Hamitli Mah. Uzuncaorman Sok.No:48/A Hendek / SAKARYA Telephone: +90 850 650 6266 Faks: +90 654 55 00 E-Mail: info@nanokim.net
 
Home | About | Products | News | Services | Certificates | Human Resources | Contact Us | Keywords © All Rights Reserved