Türkçe   İngilizce
Home
About
Products
News
Services
Certificates
Human Resources
Contact Us
 Quick Access
- Home Page
- About Us
Products
Thermal Insulation Motar
Adhesive Mortars
Joint Filler Materials
Filler Joint
Flex Joint Filler
Flex Pool Joint Filler
Silicone-Based Joint Filler Mortar
Water Isolation Mortars
Ground Application Mortars
Rough Construction Mortars
Primers
Repair And Plaster Mortars
Assistant Coating Products
- Services
- News
- Human Resources
- Contact
PRODUCTS
HomeProducts Joint Filler Materials « back
Flex Joint Filler
Previous 2 / 4 Next
Previous 2 / 4 Next
 

APPLICATION
Cement based, resin-containing, polymer-modified grout material. Packed in 20 kg bags. 3-6 mm in thickness gives you the opportunity to application. Has the option to narrow and wide application. Uses horizontal and vertical surfaces on inner spaces. Nanokim has different grout options. Water and frost resistant. Temperature differences are suitable for usage in areas where is concentrated. Elasticity and high performance. Interior and exterior, horizontal and vertical surfaces, ceramic, granite, ceramic, porcelain, marble-like coating material used to fill the joints.

PREPARATION AND APPLICATION OF MORTAR
Before the application dust, construction, cement residue can be found from joints, should be cleaned with a brush by scrapping off. Joint space if necessary before the application should be moistened with water. First water is put into the mixing bowl, then add Nanokim Flex grout. (6.5 liters water/25 kg bag) and stirred until all lumps are dissolved. Waited for 5 minutes mix again. Prepared mortar is applied with a rubber tip spatula. After about 50 minutes of application the surface is cleaned with a damp sponge. After the first day of application for high-performance surfaces should be dampened three days apart. Interior and exterior, dry and wet environments, horizontal and vertical surfaces, ceramic, granite, ceramic, porcelain, marble-like coating material used to fill the joints.

Joint Range (mm)                       
Ceramic Size (cm)    3 mm (gr/m)      4 mm (gr/m)      5 mm (gr/m)       6 mm (gr/m)      
10x20                            450                     630                  800                    900      
15x15                            400                     550                  700                    850      
15x20                            380                     500                  630                    740      
20x20                            330                     450                  600                    670      
20x25                            300                     400                  550                    600      
20x30                            300                     400                  550                    600      
33x33                            200                     300                  375                    400    

TECHNICAL SPECIFICATIONS
Density                                             1000±100 kg/m3
Age Unit Weight                                 1700±100 kg/m3
Average compressive strength             >17 N/mm2   
Average Bending Strength                   >3 N/mm2
Rotation time                                     >35 minutes
Usage time                                        >120 minutes
Application Temperature                      +5°C / +30°C

CERTIFICATE OF CONFORMITY
The above data have been obtained in laboratory. For more information, please consult our Technical Department. Nanokim reserves the right to change the above information. Nanokim is not responsible for any failure due to misapplication.

Other Products in This Group
   • Silicone-Based Joint Filler Mortar  
   • Flex Pool Joint Filler  
   • Flex Joint Filler  
   • Filler Joint  
   
 
 
Address: Hamitli Mah. Uzuncaorman Sok.No:48/A Hendek / SAKARYA Telephone: +90 850 650 6266 Faks: +90 654 55 00 E-Mail: info@nanokim.net
 
Home | About | Products | News | Services | Certificates | Human Resources | Contact Us | Keywords © All Rights Reserved